For caravan parks, holiday parks & cabin operators

Caravan park & cabin automation that greets the guest and guards the bill.

Cabins and villas spread across a park are hard to keep an eye on. 4Control runs each one as its own zone — air-conditioning, path and entry lighting, and a PMS-issued smart lock — so a late arrival walks into a lit path and a comfortable cabin, while the air-con never runs flat out in an empty unit again.

Book a 20-minute walkthrough See the energy savings
Per cabin
each unit runs as its own zone, even when units are detached buildings
Up to 50%
HVAC energy reduction from occupancy-based air-conditioning control
After-hours
self check-in with time-bound smart-lock codes and automatic path lighting
Why parks are hard to control

Detached cabins mean waste you can't see from reception.

When your rooms are scattered cabins and villas, nobody is walking past to notice an air-conditioner running in an empty unit or a light left on for two days. Per-cabin automation gives you that oversight centrally — and acts on it automatically.

Scattered

Empty cabins running air-con unsupervised

A detached cabin between guests can run HVAC for days unnoticed. Occupancy-based control drops each unit to setback and pre-conditions it before the next arrival.

Dark

Late arrivals to an unlit, unwelcoming unit

Path and entry lighting come up automatically on arrival, so guests reaching a remote cabin after dark feel expected — without lights burning all night for no one.

Keys

Managing physical keys across a whole park

TTLock codes are issued per booking and expire with it — no key handovers, no lockbox, no after-hours reception needed.

Unseen

Guest EV charging at a powered site or cabin

Circuit-level monitoring flags an unexpected 50+ kWh overnight draw within minutes, so you can recover the cost instead of absorbing it.

Gate & access control

Front gates that know who's arriving.

The boom gate is the first impression at a caravan park — and the most common source of after-hours phone calls. 4Control retrofits existing gates (or supplies a whole new one) and gives you every modern entry method: PIN, RFID, QR from apps like AppMyCommunity, and Hikvision ANPR number plate recognition. Access rights sync directly from RMS, Newbook, Mews, Opera, Cloudbeds and more — the guest's arrival is expected, so the gate lifts itself.

Hikvision ANPR with fuzzy matching

AI-driven plate recognition tolerates dirty plates and poor lighting. Fully supports offline mode when the internet drops.

PMS-driven access rights

RMS, Newbook, Mews, Opera, Cloudbeds and more. The gate updates automatically as bookings change.

Retrofit your existing gate

No need to replace working hardware. Your gate supplier or technician installs on top of what you already have.

From $900 hardware · $55/month

Straightforward pricing in AUD. See full pricing & the ANPR walkthrough →

What parks gain

Central oversight, automatic action, happier late arrivals.

Roll it out one cabin block at a time. The hardware is off-the-shelf, electrically certified for commercial installation, and self-installable by a licensed electrician.

Up to 50%
heating & cooling energy reduced
Per-cabin occupancy control across the whole park
Self
after-hours check-in
PMS-issued smart-lock codes plus automatic entry and path lighting
Central
visibility of every unit
See each cabin's climate, door and energy state at a glance
Phased
rollout, block by block
Start with one cabin block and expand across the park

See the detailed savings on our HVAC energy savings page, or check which Australian rebates apply to holiday-park upgrades.